If you use the self feeding mixer every day, you will find that the tank is getting smaller and smaller. This is because if it is not cleaned, the material will adhere to the tank wall. Next, how to prevent the tanks from sticking together.
1. Bring water reducer to the car
Superplasticizer is a kind of concrete admixture, which can reduce the amount of water used in the mixing process without changing the slump of concrete, and can be carried to the car to adjust the concrete well. However, if you add superplasticizer, you need to remember that there are people in the laboratory of a commercial concrete station. Otherwise, the concrete will not be strong enough and the driver will have to bear the consequences.
2. Return to the factory to check the water quantity in the water tank
When you get off the train and return to the station, please check the water in the water storage tank and always keep it full, just in case.
3. Check the concrete quality before delivery
The quality of each slab may vary depending on the material. When installing concrete and leaving the site, it is necessary to check the slump and ease of concrete in the tank, and pay attention to the pre setting and stratification of concrete.
4. Reduce vehicle travel time
The specific transportation distance is usually within 30 km in diameter. Before leaving the vehicle, please plan the route and vehicle traffic to greatly reduce the vehicle time on the road.
5. Reduce losses and emissions first
The condition of the concrete in the tank should be checked whenever there are human factors or force majeure that lead to long-term unloading. As soon as the concrete starts to harden, it needs to be checked. In order to prevent the whole fuel tank from being discarded, please report to the person in charge?? It will be discharged immediately after the report.
The above is to prevent the tank from sticking from the self feeding mixer. Once mastered, it can greatly avoid this problem, improve work efficiency and reduce material loss.